Hi Hood
I am sure your diagram is correct for what I have but let me check and confirm.
If so this would mean IDE+DB25, 1=1, 2=14 and so on.
What I am wondering is, for the cable I found on ebay ref link in previous post, are the pins wired as your diagram or are they wired 1=1, 2=2, 3=3 and so on?
If the ebay item is wired as per your diagram (and if my wiring is the same) then I should leave the config as per the Gecko spec. If this is the case then there is another reason why it's not working.
The LTP1 is enabled. I am sure the IDE is plugged in correctly.
I will recheck the ribbon cable pin to pin wiring and let you guys know.
Cheers
Nigel