Hello Guest it is April 21, 2021, 08:32:50 PM

Author Topic: Licening problem  (Read 7318 times)

0 Members and 1 Guest are viewing this topic.

Licening problem
« on: June 18, 2006, 03:13:20 PM »
I have a tag mill it workers fine with Mach 2 the motors wont work with Mach 3/4 an I bought license . I received secend copy of license an will still not work . Wizard said unlicensed file. can some one help :'(
Re: Licening problem
« Reply #1 on: June 18, 2006, 05:11:47 PM »
Look in mach3 Directory, is there a Mach1Lic.dat file? If there is not copy it from the Mach2 directory and place a copy of it in the Mach3 directory.

Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: Licening problem
« Reply #2 on: June 18, 2006, 05:31:58 PM »
There a Machlic in the file  I have rerun file several times
Re: Licening problem
« Reply #3 on: June 18, 2006, 06:30:55 PM »
under help / about do you see your name?
Also you should be able to move your motors is you don't have a licanse... Could you please post your Mach2 and Mach3 XML files? I would like to check them to see if you have a bad setting.
Thanks
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: Licening problem
« Reply #4 on: June 18, 2006, 07:01:37 PM »
how do i post the file to you
Re: Licening problem
« Reply #5 on: June 18, 2006, 07:02:48 PM »
how do i post the files to you so you can inspect to see if it's corrupted
Re: Licening problem
« Reply #6 on: June 18, 2006, 07:06:01 PM »
Try this
Re: Licening problem
« Reply #7 on: June 18, 2006, 07:14:31 PM »
hear is Mach2
Re: Licening problem
« Reply #8 on: June 18, 2006, 08:03:24 PM »
The Mach2 one is an XML not a sys file :) i think you got the wrong one..
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: Licening problem
« Reply #9 on: June 18, 2006, 11:51:15 PM »
Is whathyou want