Hello
Guest
it is
April 19, 2024, 03:53:18 PM
Guest
Login
Register
Menu
Home
Help
Search
Calendar
Members
Members
View the memberlist
Search For Members
Login
Register
YouTube
Machsupport Forum
/
G-Code, CAD, and CAM
/
LazyCam (Beta)
/
LazyCam Pro question
« previous
next »
Print
Pages:
1
2
3
4
5
»
Go Down
Author
Topic: LazyCam Pro question (Read 21956 times)
0 Members and 1 Guest are viewing this topic.
Saumur
79
LazyCam Pro question
«
on:
February 06, 2008, 05:19:37 PM »
Hi guys.
With LazyCam i can import a drawing but then i don't know where i can set my tool's settings.
Can some1 explain me this?
Thanks
Logged
Rybot
14
Re: LazyCam Pro question
«
Reply #1 on:
February 06, 2008, 08:05:03 PM »
After you import a DXF file click the Layers tab at the bottom of the Info window, press the tool button and input the name, diameter, feed rate and so on.
Logged
Saumur
79
Re: LazyCam Pro question
«
Reply #2 on:
February 08, 2008, 10:02:41 AM »
Thanks.
Is there a way to put the measouring unit in mm? Because i work with mm but i can't find where i can change it.
Logged
Chip
2,055
Gainesville Florida USA
Re: LazyCam Pro question
«
Reply #3 on:
February 08, 2008, 08:50:11 PM »
Hi, Saumur
LazyCam works in Units, If your DXF is in MM, Then it's MM in LCam.
Thanks, Chip
Logged
Saumur
79
Re: LazyCam Pro question
«
Reply #4 on:
February 19, 2008, 10:07:06 AM »
can you work in diameter mode with lazycam?
thanks
Logged
Saumur
79
Re: LazyCam Pro question
«
Reply #5 on:
February 21, 2008, 11:27:07 AM »
anyone?
Logged
Chip
2,055
Gainesville Florida USA
Re: LazyCam Pro question
«
Reply #6 on:
February 21, 2008, 02:47:03 PM »
Hi, Saumur
Lathe uses a Profile top half of your dxf drawing.
Hope this Helps, Chip
Logged
Saumur
79
Re: LazyCam Pro question
«
Reply #7 on:
February 29, 2008, 11:20:44 AM »
Guys, i'm sending you the dxf i'm using.
If you can tell me how i have to configure lazycam to generate a g-code of this i would really appreciate it since i can't do it...
Thanks
Logged
Saumur
79
Re: LazyCam Pro question
«
Reply #8 on:
February 29, 2008, 12:03:17 PM »
I could do the g-code but i don't understand why when i put the tool it's like the program is not reading it.
In fact if i change the diameter of it the program will be the same.
Do i have to do something in Mach3 too?
Thanks
Logged
Chip
2,055
Gainesville Florida USA
Re: LazyCam Pro question
«
Reply #9 on:
February 29, 2008, 06:59:14 PM »
Hi, Saumur
Is it a Lathe profile your looking for ?
Your dxf diden't clean up weii, Loaded it in BobCad, traced it and saved under dif name.
Is this what its should look like.
Thanks, Chip
Logged
Print
Pages:
1
2
3
4
5
»
Go Up
« previous
next »