Hello Guest it is May 07, 2021, 03:42:46 PM

Author Topic: 5 axis  (Read 569 times)

0 Members and 1 Guest are viewing this topic.

5 axis
« on: September 30, 2020, 01:55:21 AM »
Hi group members,
i am encountering an error message when i am loading my 5 axis tooth path.  ( No digits found where real number should beline 6).
i am using rhinocam to generate the g code.
please help.
thanks

Offline TPS

*
  •  2,123 2,123
    • View Profile
Re: 5 axis
« Reply #1 on: September 30, 2020, 04:30:27 AM »
to be able to help we should see the code.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: 5 axis
« Reply #2 on: September 30, 2020, 04:52:48 AM »
Hi,
thanks for your response.
attached pics is for your reference.
i will send you full g codes if you required.
thanks,

Offline TPS

*
  •  2,123 2,123
    • View Profile
Re: 5 axis
« Reply #3 on: September 30, 2020, 04:57:03 AM »
-code file would be great
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline TPS

*
  •  2,123 2,123
    • View Profile
Re: 5 axis
« Reply #4 on: September 30, 2020, 05:03:39 AM »
i Think i found it, ther are two -- in line 6 after A
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: 5 axis
« Reply #5 on: September 30, 2020, 07:37:35 AM »
ok.
it is generated by the rhinocam.
how i can figure it out.
any suggestion?

Offline TPS

*
  •  2,123 2,123
    • View Profile
Re: 5 axis
« Reply #6 on: September 30, 2020, 07:45:03 AM »
i have no idea about rhinocam.

is the code loading, if you edit manualy?
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: 5 axis
« Reply #7 on: September 30, 2020, 08:03:06 AM »
First i will try to edit this file and see if it works.
what cam software if suitable for 5 axis?
 

Offline TPS

*
  •  2,123 2,123
    • View Profile
Re: 5 axis
« Reply #8 on: September 30, 2020, 08:31:42 AM »
sorry i have no experience with 5-axis machines.

here: https://www.machsupport.com/forum/index.php?topic=32107.0

is something about a plugin
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: 5 axis
« Reply #9 on: October 01, 2020, 03:37:58 AM »
i have seen you link regarding 5 axis when opening the link i can not find where to download.
have you tried that link.
please check and tell me.
thanks,