Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Iftikhar Amin on September 30, 2020, 01:55:21 AM

Title: 5 axis
Post by: Iftikhar Amin on September 30, 2020, 01:55:21 AM
Hi group members,
i am encountering an error message when i am loading my 5 axis tooth path.  ( No digits found where real number should beline 6).
i am using rhinocam to generate the g code.
please help.
thanks
Title: Re: 5 axis
Post by: TPS on September 30, 2020, 04:30:27 AM
to be able to help we should see the code.
Title: Re: 5 axis
Post by: Iftikhar Amin on September 30, 2020, 04:52:48 AM
Hi,
thanks for your response.
attached pics is for your reference.
i will send you full g codes if you required.
thanks,
Title: Re: 5 axis
Post by: TPS on September 30, 2020, 04:57:03 AM
-code file would be great
Title: Re: 5 axis
Post by: TPS on September 30, 2020, 05:03:39 AM
i Think i found it, ther are two -- in line 6 after A
Title: Re: 5 axis
Post by: Iftikhar Amin on September 30, 2020, 07:37:35 AM
ok.
it is generated by the rhinocam.
how i can figure it out.
any suggestion?
Title: Re: 5 axis
Post by: TPS on September 30, 2020, 07:45:03 AM
i have no idea about rhinocam.

is the code loading, if you edit manualy?
Title: Re: 5 axis
Post by: Iftikhar Amin on September 30, 2020, 08:03:06 AM
First i will try to edit this file and see if it works.
what cam software if suitable for 5 axis?
 
Title: Re: 5 axis
Post by: TPS on September 30, 2020, 08:31:42 AM
sorry i have no experience with 5-axis machines.

here: https://www.machsupport.com/forum/index.php?topic=32107.0

is something about a plugin
Title: Re: 5 axis
Post by: Iftikhar Amin on October 01, 2020, 03:37:58 AM
i have seen you link regarding 5 axis when opening the link i can not find where to download.
have you tried that link.
please check and tell me.
thanks,
Title: Re: 5 axis
Post by: TPS on October 01, 2020, 04:04:25 AM
ok you are right, the Homepage seems do be down.
maybe you send krw125 a personal message or contact him via YouTube.
Title: Re: 5 axis
Post by: Tweakie.CNC on October 01, 2020, 04:13:31 AM
i have seen you link regarding 5 axis when opening the link i can not find where to download.
have you tried that link.
please check and tell me.
thanks,

Unfortunately, over the years KRW125 has posted many links and none of them have been valid or led to a workable Mach3 solution. His video's appear to show a working model but it has not been proven that this is not just an elaborate hoax.

Tweakie.
Title: Re: 5 axis
Post by: reuelt on October 01, 2020, 06:25:14 AM
http://motion5x.fr/
His new website is under construction
And he posted on another forum in French in 2020
https://www.usinages.com/threads/table-5-axes-et-plugin-5-axes.129222/
Title: Re: 5 axis
Post by: hradford5 on October 03, 2020, 12:26:32 PM
First i will try to edit this file and see if it works.
what cam software if suitable for 5 axis?
 
Fusion 360 will generate 5 axis code.
Title: Re: 5 axis
Post by: Iftikhar Amin on October 04, 2020, 03:21:57 AM
thanks for the advise.
have you tried fusion 360 for mach3 5axis.
please tell me how i can configure mach3 PP
Title: Re: 5 axis
Post by: hradford5 on October 04, 2020, 08:09:07 AM
I haven't used it myself (I have a multi-axis seat of Mastercam), but this guy has successfully done so.

https://www.instructables.com/DIY-Desktop-5-axis-CNC-Mill/?utm_source=newsletter&utm_medium=email
Title: Re: 5 axis
Post by: Iftikhar Amin on October 05, 2020, 01:31:31 AM
thanks a lot.
this post will help me.