Hello Guest it is April 19, 2024, 06:10:38 AM
Profile Guest
« previous next »
Pages: 1 2 »   Go Down

Author Topic: 5 axis  (Read 2108 times)

0 Members and 1 Guest are viewing this topic.

Offline Iftikhar Amin

*
  • 7 7
    • View Profile
5 axis
« on: September 30, 2020, 01:55:21 AM »
Hi group members,
i am encountering an error message when i am loading my 5 axis tooth path.  ( No digits found where real number should beline 6).
i am using rhinocam to generate the g code.
please help.
thanks
Logged

Offline TPS

*
  • 2,505 2,505
    • View Profile
Re: 5 axis
« Reply #1 on: September 30, 2020, 04:30:27 AM »
to be able to help we should see the code.
Logged
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline Iftikhar Amin

*
  • 7 7
    • View Profile
Re: 5 axis
« Reply #2 on: September 30, 2020, 04:52:48 AM »
Hi,
thanks for your response.
attached pics is for your reference.
i will send you full g codes if you required.
thanks,
Logged

Offline TPS

*
  • 2,505 2,505
    • View Profile
Re: 5 axis
« Reply #3 on: September 30, 2020, 04:57:03 AM »
-code file would be great
Logged
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline TPS

*
  • 2,505 2,505
    • View Profile
Re: 5 axis
« Reply #4 on: September 30, 2020, 05:03:39 AM »
i Think i found it, ther are two -- in line 6 after A
Logged
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline Iftikhar Amin

*
  • 7 7
    • View Profile
Re: 5 axis
« Reply #5 on: September 30, 2020, 07:37:35 AM »
ok.
it is generated by the rhinocam.
how i can figure it out.
any suggestion?
Logged

Offline TPS

*
  • 2,505 2,505
    • View Profile
Re: 5 axis
« Reply #6 on: September 30, 2020, 07:45:03 AM »
i have no idea about rhinocam.

is the code loading, if you edit manualy?
Logged
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline Iftikhar Amin

*
  • 7 7
    • View Profile
Re: 5 axis
« Reply #7 on: September 30, 2020, 08:03:06 AM »
First i will try to edit this file and see if it works.
what cam software if suitable for 5 axis?
 
Logged

Offline TPS

*
  • 2,505 2,505
    • View Profile
Re: 5 axis
« Reply #8 on: September 30, 2020, 08:31:42 AM »
sorry i have no experience with 5-axis machines.

here: https://www.machsupport.com/forum/index.php?topic=32107.0

is something about a plugin
Logged
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline Iftikhar Amin

*
  • 7 7
    • View Profile
Re: 5 axis
« Reply #9 on: October 01, 2020, 03:37:58 AM »
i have seen you link regarding 5 axis when opening the link i can not find where to download.
have you tried that link.
please check and tell me.
thanks,
Logged
Pages: 1 2 »   Go Up
« previous next »