The info you require is on the Warp9 site
It's the one for the new 186 and it states that on the software screen it works because I have just done it
Have a look at DTG vidieo for the new beta plugin it's 99% of the 186 he explains it well
It's all there in the two places you just need to take your time and look and read till you understand , I cannot help you more nor can others as we do not have your machine to refer to , we do not know how you have it wired e.g. Pin outs , nor do we know if your setup needs active highs or lows
The one bit of info I will give you that is not easily found is that the inputs to port two are inverted in respect to port one ,e.g. If it needs a high on one you need a low on port two due to there being only one logic gate on two nad two on one
Pleas have a look at the two sources I have recommended they will help , when you sort it out yourself you will understand how it works this will help in the future
Regards Stuart
Ps they are nearly identical it's only under the hood changes