Hello
Guest
it is
April 17, 2024, 11:08:51 PM
Guest
Login
Register
Menu
Home
Help
Search
Calendar
Members
Members
View the memberlist
Search For Members
Login
Register
YouTube
Machsupport Forum
/
Mach Discussion
/
General Mach Discussion
/
2010 Screen-Set go to zero
« previous
next »
Print
Pages:
1
Go Down
Author
Topic: 2010 Screen-Set go to zero (Read 2220 times)
0 Members and 1 Guest are viewing this topic.
Davek0974
2,606
2010 Screen-Set go to zero
«
on:
April 03, 2016, 01:11:09 PM »
On the excellent 2010 scree-set goto zero's button, is it possible to edit the commands ?
I find it does Z first which can be dodgy with fixtures etc in the way, would be good to lift Z then move the X & Y
Logged
Hood
25,835
Carnoustie, Scotland
Re: 2010 Screen-Set go to zero
«
Reply #1 on:
April 03, 2016, 02:08:36 PM »
Never had the 2010 screenset but could it be you do not have a safe Z set in Mach?
Hood
Logged
Davek0974
2,606
Re: 2010 Screen-Set go to zero
«
Reply #2 on:
April 03, 2016, 02:14:16 PM »
Possibly, I thought my safe z was zero, will have to check it.
Thanks
Logged
ger21
6,295
Re: 2010 Screen-Set go to zero
«
Reply #3 on:
April 03, 2016, 02:32:42 PM »
It uses Mach3's built in Goto Zero function.
If you want to change it, you need to use a screen editor to change the function of the button.
Logged
Gerry
2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Davek0974
2,606
Re: 2010 Screen-Set go to zero
«
Reply #4 on:
April 03, 2016, 02:35:17 PM »
Ok, thanks, wasn't sure if it was a macro call.
Logged
Print
Pages:
1
Go Up
« previous
next »