Hi guys,
I'd like to ask for your help. I've been trying to connect the handwheel (see image) to MACH3 and use it for jogging, without success so far. I have searched for information here on forum and on the web, only to get even more confused.
My question is, is it at all possible to connect and setup this handwheel without having second LPT port, modbus card, some special plugins etc.?
What I did is connect the handwheel's Vcc, GND, A(pin 13) nd B(pin15) to my BOB, and setup an MPG#1 as on the attached setup image. I guess I was overly optimistic, and I'm more than probably missing something, so I'd be thankful for any help.
I also wanted to ask if there's any option to select the axis for jogging via BOB terminals and if so, how to setup this?
If this has to do some other way, I'd also be grateful to some links to the information how exactly it should be done.
Best,
Miso