Hello
Guest
it is
April 26, 2024, 09:49:07 AM
Guest
Login
Register
Menu
Home
Help
Search
Calendar
Members
Members
View the memberlist
Search For Members
Login
Register
YouTube
Machsupport Forum
/
Mach Discussion
/
General Mach Discussion
/
No jogging now
« previous
next »
Print
Pages:
1
Go Down
Author
Topic: No jogging now (Read 4940 times)
0 Members and 1 Guest are viewing this topic.
M250cnc
591
No jogging now
«
on:
September 09, 2009, 07:13:41 AM »
Hi i have been doing some screen designing "Standard Lathe Screen" and now the manual jogging has stopped working
I can use the jog toggle button to change to mpg and this will work with my mpg
I change screens and jogging works again
Any ideas ?
Phil
Logged
The Good Thing About Mach3, Is It's very Configurable
The Bad Thing About Mach3, Is It's Too Configurable
ger21
6,295
Re: No jogging now
«
Reply #1 on:
September 09, 2009, 07:32:02 AM »
You need a jog on/off button on the screen to allow jogging.
Logged
Gerry
2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
M250cnc
591
Re: No jogging now
«
Reply #2 on:
September 09, 2009, 07:37:12 AM »
Jogging on off defiantly there, i have moved it to page 0 surely that wouldn't make a difference.
Phil
Logged
The Good Thing About Mach3, Is It's very Configurable
The Bad Thing About Mach3, Is It's Too Configurable
ger21
6,295
Re: No jogging now
«
Reply #3 on:
September 09, 2009, 09:00:01 AM »
It has to be on
every
page you want to jog on.
Logged
Gerry
2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
M250cnc
591
Re: No jogging now
«
Reply #4 on:
September 09, 2009, 09:26:59 AM »
Done some more testing it does indeed stop working.
So what is the solution
«
Last Edit: September 09, 2009, 10:09:52 AM by Phil_H
»
Logged
The Good Thing About Mach3, Is It's very Configurable
The Bad Thing About Mach3, Is It's Too Configurable
ger21
6,295
Re: No jogging now
«
Reply #5 on:
September 09, 2009, 10:08:43 AM »
Quote from: Phil_H on September 09, 2009, 09:26:59 AM
I put it back on a page but it still doesn't jog.
Are you sure it's not in MPG mode?
Logged
Gerry
2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
M250cnc
591
Re: No jogging now
«
Reply #6 on:
September 09, 2009, 10:12:14 AM »
I have put a led to know what mode its in. it WILL work in MPG mode with an mpg not not jog cont.
Please look at an edited reply above
Logged
The Good Thing About Mach3, Is It's very Configurable
The Bad Thing About Mach3, Is It's Too Configurable
ger21
6,295
Re: No jogging now
«
Reply #7 on:
September 09, 2009, 10:16:56 AM »
Now I'm confused after you edited your posts. If you have a Jog on/off button on the current page, and you're in the correct jog mode, it should jog.
Logged
Gerry
2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
M250cnc
591
Re: No jogging now
«
Reply #8 on:
September 09, 2009, 10:23:43 AM »
Hi i have now solved the issue with the clues you provided
I am using the fantastic Machscreen program
I checked the button properties for the jog button on an individual page it had global set to NO
On the page i have the button it is a global page "0" i changed the buttons properties from global Yes to global NO and now it is working
Phil
«
Last Edit: September 09, 2009, 10:31:55 AM by Phil_H
»
Logged
The Good Thing About Mach3, Is It's very Configurable
The Bad Thing About Mach3, Is It's Too Configurable
Print
Pages:
1
Go Up
« previous
next »