Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: M250cnc on September 09, 2009, 07:13:41 AM
-
Hi i have been doing some screen designing "Standard Lathe Screen" and now the manual jogging has stopped working
I can use the jog toggle button to change to mpg and this will work with my mpg
I change screens and jogging works again
Any ideas ?
Phil
-
You need a jog on/off button on the screen to allow jogging.
-
Jogging on off defiantly there, i have moved it to page 0 surely that wouldn't make a difference.
Phil
-
It has to be on every page you want to jog on.
-
Done some more testing it does indeed stop working.
So what is the solution ;D
-
I put it back on a page but it still doesn't jog.
Are you sure it's not in MPG mode?
-
I have put a led to know what mode its in. it WILL work in MPG mode with an mpg not not jog cont.
Please look at an edited reply above
-
Now I'm confused after you edited your posts. If you have a Jog on/off button on the current page, and you're in the correct jog mode, it should jog.
-
Hi i have now solved the issue with the clues you provided
I am using the fantastic Machscreen program
I checked the button properties for the jog button on an individual page it had global set to NO
On the page i have the button it is a global page "0" i changed the buttons properties from global Yes to global NO and now it is working
Phil