Hello
Guest
it is
April 25, 2024, 06:08:38 PM
Guest
Login
Register
Menu
Home
Help
Search
Calendar
Members
Members
View the memberlist
Search For Members
Login
Register
YouTube
Machsupport Forum
/
Mach Discussion
/
General Mach Discussion
/
Wont run G code
« previous
next »
Print
Pages:
1
2
»
Go Down
Author
Topic: Wont run G code (Read 6192 times)
0 Members and 1 Guest are viewing this topic.
bfairey
40
Wont run G code
«
on:
April 08, 2009, 10:56:58 AM »
It loads the Gcode ie Roadrunner but wont run it.
Which button do I push?
?
The PC is not connected to a machine.
Brian.
Logged
Hood
25,835
Carnoustie, Scotland
Re: Wont run G code
«
Reply #1 on:
April 08, 2009, 11:07:24 AM »
Is the RESET flashing?
Hood
Logged
ger21
6,295
Re: Wont run G code
«
Reply #2 on:
April 08, 2009, 11:07:58 AM »
Do you have all the axis setup in ports and pins?
Logged
Gerry
2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
bfairey
40
Re: Wont run G code
«
Reply #3 on:
April 08, 2009, 05:49:41 PM »
reset not flashing
port and pins set correctly
Logged
Hood
25,835
Carnoustie, Scotland
Re: Wont run G code
«
Reply #4 on:
April 08, 2009, 05:52:24 PM »
please attach your xml.
Hood
Logged
bfairey
40
Re: Wont run G code
«
Reply #5 on:
April 08, 2009, 06:10:32 PM »
The only error I found was under Config check
Output signal check
Pin for output found as not pins 1-9, 14, 16 or 17 unless using "modbus"
??
This is wrong.
Please comment.
Brian.
Logged
Hood
25,835
Carnoustie, Scotland
Re: Wont run G code
«
Reply #6 on:
April 08, 2009, 06:13:37 PM »
please attach your xml
Hood
Logged
bfairey
40
Re: Wont run G code
«
Reply #7 on:
April 09, 2009, 05:31:12 PM »
Hood did you get my XML file?
Brian.
Logged
Hood
25,835
Carnoustie, Scotland
Re: Wont run G code
«
Reply #8 on:
April 09, 2009, 05:33:44 PM »
nope
Hood
Logged
bfairey
40
Re: Wont run G code
«
Reply #9 on:
April 09, 2009, 06:21:33 PM »
Try this
Brian.
Logged
Print
Pages:
1
2
»
Go Up
« previous
next »