Hello Guest it is January 28, 2022, 11:02:56 PM

Author Topic: autocad vs. lazycam  (Read 3512 times)

0 Members and 1 Guest are viewing this topic.

autocad vs. lazycam
« on: August 20, 2008, 10:23:38 AM »
How can open a DXF file onto LazyCam after was made out in Autocad
I did click OpenDXF in LazyCam but No Entities Found...
uuccimi - novice
Re: autocad vs. lazycam
« Reply #1 on: August 20, 2008, 10:57:05 AM »
Did you close your dxf file that AutoCad created?  If the file is still open, it won't load into LC.

Bob@BobsShop - Been there done that.
Re: autocad vs. lazycam
« Reply #2 on: August 20, 2008, 11:34:43 AM »
Did you close your dxf file that AutoCad created? If the file is still open, it won't load into LC.

Bob@BobsShop - Been there done that.
Ok, I did close autocad, try to open with Lcam, but won't load any thing and see 2749.87 scale number in the blue screen
uuccimi - novice

Offline ger21

*
  • *
  •  6,292 6,292
    • View Profile
    • The CNC Woodworker
Re: autocad vs. lazycam
« Reply #3 on: August 20, 2008, 11:50:58 AM »
Save as V12 .dxf from AutoCAD and try that.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: autocad vs. lazycam
« Reply #4 on: August 20, 2008, 12:46:43 PM »
Save as V12 .dxf from AutoCAD and try that.
Thanks ger21
V12.dxf  works!!!
uuccimi - novice