anyone knows if you create a g-code that starts the drawing from the right instead of left?

thanks

Hi, Saumur

Move the 0,0 marker to the right side, Click on it hold down and move it to the right side.

Thanks, Chip

Thanks Chip,

one last thing; my drawing is divided in 4 chains.Is there a way to combine them all and have only 1 chain?
I tried with optimize and sometimes it combine 2 chains into 1 but after that i can't combine others 2.

Hi, Saumur

Your lines probillyhave a small gap, Try setting the Setup, Load Options, Connection Line Tol. to .01, then re-load your file.

Thanks, Chip

THANK MAN!!!!

Thanks for the help guys thanks to you i learnt many things.

If it's possible to do this i'll be able to do all the things i need: is it possible to create a g0 movement from lazycam so that when the piece is done the tool move away from it?
More like if with lazycam you can create a g0 movement you want or you must do it with your cad?

Thanks

anyone knows?

Saumur,
I just edit the tap file at the end.

G0 Z? (to make sure Z is up and will clear everything)
G0 X? Y? (to where ever you want)
M30

Thanks for the answer,

yes that's a possibility i just wanted to know if you can create them in LC.