Hello Guest it is March 29, 2024, 09:31:53 AM

Author Topic: LazyCam Pro question  (Read 21864 times)

0 Members and 1 Guest are viewing this topic.

Re: LazyCam Pro question
« Reply #40 on: March 11, 2008, 02:50:03 PM »
anyone knows if you create a g-code that starts the drawing from the right instead of left?

thanks

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: LazyCam Pro question
« Reply #41 on: March 11, 2008, 05:00:14 PM »
Hi, Saumur

Move the 0,0 marker to the right side, Click on it hold down and move it to the right side.

Thanks, Chip
« Last Edit: March 11, 2008, 05:03:07 PM by Chip »
Re: LazyCam Pro question
« Reply #42 on: March 12, 2008, 11:21:28 AM »
Thanks Chip,

one last thing; my drawing is divided in 4 chains.Is there a way to combine them all and have only 1 chain?
I tried with optimize and sometimes it combine 2 chains into 1 but after that i can't combine others 2.

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: LazyCam Pro question
« Reply #43 on: March 12, 2008, 01:24:06 PM »
Hi, Saumur

Your lines probillyhave a small gap, Try setting the Setup, Load Options, Connection Line Tol. to .01, then re-load your file.

Thanks, Chip
« Last Edit: March 12, 2008, 01:26:06 PM by Chip »
Re: LazyCam Pro question
« Reply #44 on: March 13, 2008, 10:45:39 AM »
THANK MAN!!!!
Re: LazyCam Pro question
« Reply #45 on: March 13, 2008, 11:10:48 AM »
Thanks for the help guys thanks to you i learnt many things.

If it's possible to do this i'll be able to do all the things i need: is it possible to create a g0 movement from lazycam so that when the piece is done the tool move away from it?
More like if with lazycam you can create a g0 movement you want or you must do it with your cad?

Thanks
Re: LazyCam Pro question
« Reply #46 on: March 14, 2008, 11:09:06 AM »
anyone knows?
Re: LazyCam Pro question
« Reply #47 on: March 14, 2008, 12:10:27 PM »
Saumur,
I just edit the tap file at the end.

G0 Z? (to make sure Z is up and will clear everything)
G0 X? Y? (to where ever you want)
M30
Re: LazyCam Pro question
« Reply #48 on: March 14, 2008, 12:21:21 PM »
Thanks for the answer,

yes that's a possibility i just wanted to know if you can create them in LC.