Hello Guest it is March 28, 2024, 10:32:37 AM

Author Topic: Discontinuous execution of the contours  (Read 2755 times)

0 Members and 1 Guest are viewing this topic.

Discontinuous execution of the contours
« on: April 27, 2006, 08:29:36 AM »
Hi to all. Since I had any losses of step, I have reduced the acceleration of the 10-20s motors mm s/s. As in the figure.
In this way the execution of a circle is not uniform anymore, but to hiccup. There is a cure. Thanks in advance, Giordano
Re: Discontinuous execution of the contours
« Reply #1 on: April 28, 2006, 08:18:54 AM »
You have to Retune your axis after you change your Khz mode. Sorry
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com