Hello Guest it is March 29, 2024, 12:55:42 AM

Author Topic: Mach3  (Read 1116 times)

0 Members and 1 Guest are viewing this topic.

Mach3
« on: May 06, 2021, 09:03:03 AM »
Mach 3

Hi there...I've been looking for the correct port address to use for my USB controller....all the blogs I read mention the printer port address but I cannot find anything on USB settings.

Can any helps please?

Cheers

Iain

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Mach3
« Reply #1 on: May 06, 2021, 12:56:46 PM »
usb Controller will Need a plugin.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: Mach3
« Reply #2 on: May 07, 2021, 02:21:26 AM »
So you don’t enter any settings for the port number if it’s usb?  The driver takes care of the address?  Cheers Iain

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Mach3
« Reply #3 on: May 07, 2021, 02:45:54 AM »
there is no "global" answer for this, it is allways depending on your Controller.

witch Controller are you using?
any documentation avaliable?
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Mach3
« Reply #4 on: May 09, 2021, 06:04:40 AM »
So you don’t enter any settings for the port number if it’s usb?  The driver takes care of the address?  Cheers Iain
No, no port address needed with a USB controller.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html