Hello Guest it is March 29, 2024, 08:50:51 AM

Author Topic: X axis direction  (Read 1514 times)

0 Members and 1 Guest are viewing this topic.

Offline onescentpro

*
  •  6 6
  • Newbie
    • View Profile
X axis direction
« on: April 14, 2021, 12:43:56 PM »
Does anyone have an idea why when I jog the X axis with the x- and x+ that they move in the same direction? Has anyone had that problem and if so, how do you fix it?

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: X axis direction
« Reply #1 on: April 14, 2021, 01:24:37 PM »
possible Problems:
-Dir Signal wrong configured
-Dir Signal wrong wiring
-System >Hotkey's same keycode for both direction's

anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline onescentpro

*
  •  6 6
  • Newbie
    • View Profile
Re: X axis direction
« Reply #2 on: April 15, 2021, 11:53:47 AM »
Thanks, got it working.
Re: X axis direction
« Reply #3 on: June 26, 2021, 10:28:48 PM »
Thanks, got it working.

Can you tell me exactly what you did?   I am having this exact problem with my Y and slaved A motors....they start out working fine, and then both the + and - jog send it the same direction...which is incidentally the direction that it is running very smoothly....the other direction is very jerky and struggling.