Hello Guest it is March 28, 2024, 07:33:56 AM

Author Topic: X and Y axis homing in the wrong direction  (Read 1141 times)

0 Members and 1 Guest are viewing this topic.

X and Y axis homing in the wrong direction
« on: December 09, 2020, 12:06:27 PM »
My X axis switch is on the far left as facing the machine, and my Y axis switch is at the front.  So I want them to home in the negative direction for the axis. 

The Z axis switch is the opposite.  I have it set so it stops the spindle from going too high, thus the positive direction. 

The Z axis homes properly for what I want, but the X and Y go the opposite direction that I want them too, that is, also in the positive like the Z axis.

How do I make my X and Y home in the negative direction, that is, to the left?
Re: X and Y axis homing in the wrong direction
« Reply #1 on: December 09, 2020, 12:59:09 PM »
I forgot to mention.  I use as ESS.
Re: X and Y axis homing in the wrong direction
« Reply #2 on: December 09, 2020, 02:05:30 PM »
You can set the homing direction in the 'Homing/SoftLimits' tab in the Control Configuration. It is the first column
Re: X and Y axis homing in the wrong direction
« Reply #3 on: December 09, 2020, 02:21:14 PM »
Thank you!  I must be blind.