Hello Guest it is June 13, 2024, 11:39:16 PM

Author Topic: it is possible with Mach3  (Read 1128 times)

0 Members and 1 Guest are viewing this topic.

it is possible with Mach3
« on: May 02, 2019, 08:39:01 PM »
Greetings to all
I have my CNC router machine. and I ask you if it is possible to do what you see in the video.
the injection is done with pneumatics powered by electrovalves.
the trajectories are generated with Artcam
I'm stuck with the Mach3 I do not know how to do it
any comment I am very attentive.
thank you.

Offline TPS

  •  2,506 2,506
    • View Profile
Re: it is possible with Mach3
« Reply #1 on: May 03, 2019, 03:24:40 AM »
i think principialy it should be no Problem


use different work Offsets (G54...) for the different nozzles and M10/M11 to Switch the valves.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: it is possible with Mach3
« Reply #2 on: May 07, 2019, 09:58:17 PM »
thank you very much for your help.
I did not know about G54 and I investigated but I did not understand
Greetings to all