Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: pedropin on May 02, 2019, 08:39:01 PM

Title: it is possible with Mach3
Post by: pedropin on May 02, 2019, 08:39:01 PM

Greetings to all
I have my CNC router machine. and I ask you if it is possible to do what you see in the video.
the injection is done with pneumatics powered by electrovalves.
the trajectories are generated with Artcam
I'm stuck with the Mach3 I do not know how to do it
any comment I am very attentive.
thank you.
https://www.youtube.com/watch?v=OcTjs1cRt3U

Title: Re: it is possible with Mach3
Post by: TPS on May 03, 2019, 03:24:40 AM

i think principialy it should be no Problem

https://www.machsupport.com/forum/index.php?topic=11158.0
https://www.machsupport.com/forum/index.php?topic=35320.msg242125#msg242125

use different work Offsets (G54...) for the different nozzles and M10/M11 to Switch the valves.

Title: Re: it is possible with Mach3
Post by: pedropin on May 07, 2019, 09:58:17 PM

TPS
thank you very much for your help.
I did not know about G54 and I investigated but I did not understand
Greetings to all