Ok, thanks to the tool path and dry run, i can see a problem, i think?
Arrowed in the pic attached is a path that bothers me.
This tool plunges ok but then makes a 45 degree retract - this will be cutting metal way deeper than the insert is allowed i think on its flanks.
I can see no settings in fusion that will stop this action, lead-ins and lead-outs are off.
Any ideas?
This is the code...
N20 T0101
N22 G54
N24 M8
N26 G95
N28 G97 S707 M3
N30 G0 X45. Z0.
N32 G48 S3000
N34 G96 S100 M3
N36 G0 Z-26.4
N38 X29.
N40 G1 X25. F0.1
N42 X21.986
N44 X23.986 Z-27.4
N46 X27.425
N48 G0 X29.
N50 Z-24.933
N52 G1 X25. F0.1
Line N44 seems to be the one.