Hi Guys,
Whenever I post process, the processor is trying to move the XY before lifting the Z axis, same as return. EG Below:
Start
"(T1 D=6. CR=0. - ZMIN=-27. - FLAT END MILL)
G90 G94 G91.1 G40 G49 G17
G21
G28 G91 Z0.
G90
(2D POCKET1 3)
M5
M9
T1 M6
S17585 M3
G54
G0 X-39.903 Y41.183
G43 Z5. H1
G1 Z-1.4 F557. "
Obviously, this crashes into the part and stuff a few good cuts, I was wondering if there is a way to fix this without editing every bit of g code i create in the editor ?
Thanks