Hello Guest it is March 28, 2024, 04:52:35 PM

Author Topic: Spindle does not run when running G-code but runs when I click the toggle button  (Read 1672 times)

0 Members and 1 Guest are viewing this topic.

Please help.
I've tried known good G-Code that has worked in the past.  Everything appears to work fine except that the M3 command appears to be ignored.
Any ideas?
Thanks,
Neil
It happens to me too.  Usually I just shut down the program, restart, and it's good.

Offline stirling

*
  • *
  •  2,188 2,188
  • UK
    • View Profile
    • www.razordance.co.uk
check your m3 macro isn't corrupt.