Hello Guest it is July 16, 2019, 01:00:19 PM

Author Topic: CSMIO-ENC Spindle Orientation  (Read 9175 times)

0 Members and 1 Guest are viewing this topic.

Re: CSMIO-ENC Spindle Orientation
« Reply #50 on: July 14, 2019, 07:40:00 AM »
Page 18 of  CSMIO IP-A user manual:
"The encoder   inputs   of   CSMIO/IP-A require differential signal. If connect-ed  encoder  has  a  common  output    then  you  should  use  special  convert-er.  Connection  of  A-,  B-,  I-  to  GND  causes axis position will be distorted.  "

Page 4 of CSMIO ENC user manual:
"The   encoder needs   to   have   5V   differential outputs."

Offline Davek0974

*
  •  2,556 2,556
    • View Profile
    • DD Metal Products Ltd
Re: CSMIO-ENC Spindle Orientation
« Reply #51 on: July 14, 2019, 07:46:53 AM »
Yes thats why the open collector output won't work, it will need a line-driver as well to create a differential signal.

The signals i am using are differential already.
Bridgeport Mill, Mach3 V062, CSMIO-IP/A controller, AC Servo Drives