Hello Guest it is March 28, 2024, 07:07:05 AM

Author Topic: Z TOUCH PLATE WAS WORKING??  (Read 1700 times)

0 Members and 1 Guest are viewing this topic.

Z TOUCH PLATE WAS WORKING??
« on: January 16, 2016, 02:41:23 PM »
I found that when I put my grounding wire on the bit it sa my
Re: Z TOUCH PLATE WAS WORKING??
« Reply #1 on: January 16, 2016, 02:53:44 PM »
I found that when I put my grounding wire on the router bit it says my toolplate is grounded. If I touch my ground wire to the toolplate it acts normal. But touching the toolplate to the router / bit does nothing. Any help.. only thing I have done different is changed routers...
« Last Edit: January 16, 2016, 03:00:35 PM by Cuemaker »

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Z TOUCH PLATE WAS WORKING??
« Reply #2 on: January 16, 2016, 04:49:54 PM »
Hard to understand by your description, but it sounds like your new router is isolated.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Z TOUCH PLATE WAS WORKING??
« Reply #3 on: January 17, 2016, 01:33:47 PM »
found bad wire   tks