Yup, macros are m-codes....
Firstly.... I would take a backup of your working profile.XML file.
then I would copy and create a new "plasma profile", by renaming the copy of the working XML file (as you have a mill that works!)
Then, from the link you gave (
http://www.agelkom.com.tr/M3_2_06_screen11.zip) , they provide a M3 macro which needs to be placed in your mach3 "macros" folder (as per the instructions:
7. Rename your M3 to M3orj. Also copy and rename our M3*****. file to M3 then place the screenset (
http://www.agelkom.com.tr/Plasma11.zip) in the "Mach3" folder.
then restart mach3
then select "view" (along the top line).... and then "load screens".... scroll down to their screenset and select it.
And provided you change all the other posts and pins settings shown on that page ... you "should" have a working plasma setup.
disregard my comments about m10 / m11 as they won't apply to the other M3 setup listed above... get use to what you have then have a fiddle with the VBScript codes when you become less "new".