Hi!
I face a problem, if you have seen it, please advice:

When angle of rotation (standard DRO 118) has any value,
when i hit "reverse run" to follow the path backwards (under G40),
the machine goes somewhere else (probably follows different angle).
I didnt have this problem until now, might be any settings or something?

Versions 3.043.066 and 067 have been tried.

Giannis

Here's a print screen to show you what exactly is the problem.
There is already an angle while running.
When pause and reverse run is hit, the machine goes back with a different angle.

Have you seen that  before?

Any ideas?

I never use reverse run so cant really be of help I am afraid but possibly try an older version of Mach just in case it is one of the issues that has been introduced with 066.
Hood

The problem goes back down to version 3.043.53
It seems is old problem.
Please consider for the next version.
Thanks

Hello Giannis,

Have you been able to solve this issue? I have the same problem.

Thanks.

Juan Carlos

No, I didn't solve it...
I just run the 3.043.53 version where it works.
Giannis

Thanks!

Best Regards,

Juan Carlos

Dear Giannis.

I've just tried the 3.043.53 version, but It didn't works too. I also tested the Version R3.042.029, without lucky. I wonder if there is another thing thats makes this problem to appear. Maybe have you changed anything else?

Thanks!

Juan Carlos

Juan, I'm working with pokeys.
So the best combination that worked for me was 3.043.53 and 3.0.65 firmware for pokeys.
I spent dozens of hours to find out why and how. Seems there won't be another bug fix for mach3.
Mach4 is already here.