Hello Guest it is March 28, 2024, 06:57:59 AM

Author Topic: cannot run Mach from mid point  (Read 2197 times)

0 Members and 1 Guest are viewing this topic.

cannot run Mach from mid point
« on: March 30, 2013, 12:49:22 PM »
Why is it that if try to start Mach 3 from "run from here", the machine goes way off its coordinates?  I've done it  hundreds of times with different code and it always worked fine.  This is a new project, with new code, and it runs fine if I start from the beginning.  If, on the other hand, I bring the machine home, and then set a point in the code other than the beginning, the machine forgets its coordinates.  Why am I missing?
tony

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: cannot run Mach from mid point
« Reply #1 on: March 30, 2013, 02:31:53 PM »
Attach your xml and your code and say which line you are wanting to start from and I will see if I can find a problem.
Hood