Today we released an updated version of the plugin.
Updates/changes/fixes:
- Mach3 MPG jogging done by PoKeys device
- Mach3 plugin - Selectable polarity of the emergency STOP switch
- Mach3 plugin - SetIODevOutput bug fixed
- Mach3 plugin - limit switch handling bug fixed
- Mach3 plugin analog inputs now can be reset to inactive, fixed bug with DRO mapping
- Mach3 plugin - reconnect on lost connection
- PoKeys55 PoExtBus glitches fixed
One of the most noticeable feature is definately MPG jogging - if enabled, PoKeys handles the axes movement instead of Mach3 engine. This results in way more fluid and responsive movement of the axes under MPG jog. PoKeys devices support only continuous MPG jog, which is the most useful in everyday work.
The plugin requires PoKeys 3.0.31 firmware, available here:
http://www.poscope.com/productattachments/index/download?id=29Mach3 plugin 'beta':
http://www.poscope.com/productattachments/index/download?id=75Manual:
http://www.poscope.com/productattachments/index/download?id=77For those who own PoKeys56E devices, take a look at our new support for Cosm web service (our test feed is available at
http://cosm.com/feeds/62592). PoKeys56E devices can now be very easily configured to upload current sensor value to Cosm, where they can be access from all over the world.
Matevž, PoLabs