Hi all
Has anyone done a conversion on a Denford micro-router.
The one that has the stand alone tower with all the drivers in it.

I have, what would you like to know.

I am looking to purchase one
I have the option to get one with the black tower that I think has all the original drive boards and speed controller.

I was thinking of getting it to run of Mach3
How much of the old gear would be usable.

I have got it into my head that I just need to find out what pins are used on the rs32 plug

depending on which controller is inside will define the best way to convert to Mach3. You'll need a breakout board and possibly a 0-10v isolated control board.

Ok

How would I know the defining factor any identification or visual check
the 0-10v control board, is that for the speed control of cutter motor

a pic showing the inside of the black box should do, and yes the 0-10 is for the speed control. If you want a chat about it, i'll pm you my contact numbers.

Yes please to numbers

Software VR2.14
Model V3

That's all the details I have for it

pm'ed.

I was to slow machine now sold

that's a shame, if i hear of anything like it i'll let you know.