Hello Guest it is October 25, 2021, 04:55:08 AM

Author Topic: Denford microrouter  (Read 6393 times)

0 Members and 1 Guest are viewing this topic.

Offline berty

*
  •  74 74
    • View Profile
Denford microrouter
« on: March 22, 2012, 06:59:17 AM »
Hi all
Has anyone done a conversion on a Denford micro-router.
The one that has the stand alone tower with all the drivers in it.
Re: Denford microrouter
« Reply #1 on: March 22, 2012, 08:15:44 AM »
I have, what would you like to know.

Offline berty

*
  •  74 74
    • View Profile
Re: Denford microrouter
« Reply #2 on: March 22, 2012, 06:55:59 PM »
I am looking to purchase one
I have the option to get one with the black tower that I think has all the original drive boards and speed controller.

I was thinking of getting it to run of Mach3
How much of the old gear would be usable.

I have got it into my head that I just need to find out what pins are used on the rs32 plug

Re: Denford microrouter
« Reply #3 on: March 22, 2012, 07:11:24 PM »
depending on which controller is inside will define the best way to convert to Mach3. You'll need a breakout board and possibly a 0-10v isolated control board.

Offline berty

*
  •  74 74
    • View Profile
Re: Denford microrouter
« Reply #4 on: March 22, 2012, 07:37:12 PM »
Ok

How would I know the defining factor any identification or visual check
the 0-10v control board, is that for the speed control of cutter motor
Re: Denford microrouter
« Reply #5 on: March 22, 2012, 09:21:38 PM »
a pic showing the inside of the black box should do, and yes the 0-10 is for the speed control. If you want a chat about it, i'll pm you my contact numbers.

Offline berty

*
  •  74 74
    • View Profile
Re: Denford microrouter
« Reply #6 on: March 23, 2012, 04:29:35 AM »
Yes please to numbers

Software VR2.14
Model V3

That's all the details I have for it
Re: Denford microrouter
« Reply #7 on: March 23, 2012, 04:42:18 AM »
pm'ed.

Offline berty

*
  •  74 74
    • View Profile
Re: Denford microrouter
« Reply #8 on: March 23, 2012, 09:05:38 AM »
I was to slow machine now sold
Re: Denford microrouter
« Reply #9 on: March 23, 2012, 11:50:41 AM »
that's a shame, if i hear of anything like it i'll let you know.