The plugin work in zone white, lanch 40us (On) and 40us(Off) repit it frecuency etc......
The frecuency of work is 125Hz

Hello Art how can I load the engrave file?Thanks

Stitos,

Please accept my apologies but I really do not understand your question - could you perhaps rephrase it please.

Tweakie.

Hello Art how can I load the engrave file?Thanks

Ntlaser,

Downloads section, Plugins, Engraving Trigger plugin, Save the Engraving m3p file, Run the m3p file.
On restart of Mach the plugin will be available.

Tweakie.

sorry for the translation

The pulse is 40us on? and 40us pulse is off? continuously.
In the imge white, for example
is 12500Hz the frecuency?

Stitos,

As soon as I can I will take some measurements with an oscilloscope and report back.

Tweakie.

Thank you very much. Can in difernt feedrate and image total white. And image total black.

I don´t have oscilloscope.

Thank you very much

Ntlaser,

Further to my earlier post - The latest plugin has not yet been posted to the downloads page so after you have installed the posted version download the file 'engraving nov11-2010' from here http://www.machsupport.com/forum/index.php?action=dlattach;topic=16446.0;attach=23238 and copy the 'engraving.dll' file to your Mach3/Plugins folder. This will replace the previous version and give you the latest one. (not sure if that all makes sense but I have tried my best to describe the process  )

Tweakie.

Thanks Tweakie I 've Done it.Soon I will post in the forum about the laser machine I built 2000mm x 1500mm 150watt.Hope you and the others will like it and give  ideas!!

Ntlaser,

Looking forward to seeing the pictures of your new machine.

Tweakie.