Hi, Brian
It locked up when I entered Start Depth and Final Depth in Layer Control column's only.
Been working on Plasma with no Z hight
M3/M5 generates first Dot/Pearce then leaves the remaining 4 with on Dot/Pearce plas/post options 0,0,1,1,20,1 not default..
Manual file mode seem's to work in any sub. Dir. now and post's code to the proper Dir. as assigned in LC.
But it will not update Mach3 even if there all in the same sub. Dir. even when its \Mach3.
Auto file create still post's code in \Mach3 as Gcodefilename.tap, not in \Mach3\Gcode where it should be, but will update Mach3 with new file.
Also it will not increment further file's with the same name, test1.tap, test2.tap as it did some time back, any way I think it did.
Working on some of the post's for LC option's, I have a way to go hear, could you post an example the way it could / would be.
Just some info so you wont get board.
Thank's Chip