Hello Guest it is March 28, 2024, 02:51:01 PM

Author Topic: Is it possible to turn the screen display 180 degrees?  (Read 3544 times)

0 Members and 1 Guest are viewing this topic.

Is it possible to turn the screen display 180 degrees?
« on: May 14, 2009, 08:35:18 PM »
          Guys,
              I'm having a problem dealing with the screen display being 180 degrees from the way the mill cuts. It's driving me a little bananas. Can either the screen or the cutting be turned?

Marv Frankel
Los Angeles

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Is it possible to turn the screen display 180 degrees?
« Reply #1 on: May 14, 2009, 09:14:38 PM »
That is decided by your axis. Looking at the toolpath window, the x will run left to right and the y will be top to bottom.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Is it possible to turn the screen display 180 degrees?
« Reply #2 on: May 15, 2009, 02:18:01 AM »
If you look at the mill as having a stationary table and all movement as done by the quill does the quill follow the display?

Offline Graham Waterworth

*
  • *
  •  2,668 2,668
  • Yorkshire Dales, England
    • View Profile
Re: Is it possible to turn the screen display 180 degrees?
« Reply #3 on: May 15, 2009, 03:39:49 AM »
Have a look at this post and tell us if your machine is working this way.

http://www.machsupport.com/forum/index.php/topic,1725.msg9977.html#msg9977

Graham
Without engineers the world stops