Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Marv Frankel on May 14, 2009, 08:35:18 PM
-
Guys,
I'm having a problem dealing with the screen display being 180 degrees from the way the mill cuts. It's driving me a little bananas. Can either the screen or the cutting be turned?
Marv Frankel
Los Angeles
-
That is decided by your axis. Looking at the toolpath window, the x will run left to right and the y will be top to bottom.
Brett
-
If you look at the mill as having a stationary table and all movement as done by the quill does the quill follow the display?
-
Have a look at this post and tell us if your machine is working this way.
http://www.machsupport.com/forum/index.php/topic,1725.msg9977.html#msg9977
Graham