Hello Guest it is March 28, 2024, 11:23:36 AM

Author Topic: This program will not run on Mach3  (Read 4583 times)

0 Members and 1 Guest are viewing this topic.

This program will not run on Mach3
« on: February 27, 2009, 03:20:00 PM »
Please see attached code
Brian.
Code: [Select]

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: This program will not run on Mach3
« Reply #1 on: February 28, 2009, 02:47:01 AM »
You have not succeeded in attaching the code Brian.

Tweakie.
PEACE
Re: This program will not run on Mach3
« Reply #2 on: February 28, 2009, 07:42:43 AM »
Thanks Tweaky but where do I attach the file?
Brian.

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: This program will not run on Mach3
« Reply #3 on: February 28, 2009, 07:54:02 AM »
Hi Brian,

Click on 'Additional Options' then see 'Attach' use the 'Browse' to select the file (note only certain file types are allowed) then post.

Tweakie.
PEACE
Re: This program will not run on Mach3
« Reply #4 on: February 28, 2009, 11:06:07 AM »
Please see what you can make of this
Brian.

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: This program will not run on Mach3
« Reply #5 on: February 28, 2009, 11:30:54 AM »
You need to attach the g-code, not the .dxf
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: This program will not run on Mach3
« Reply #6 on: February 28, 2009, 12:28:42 PM »
Hi Brian,

I don't know if you are cutting the part or engraving/drawing it. Assuming the profile was to be engraved I have converted your dxf to GCode (using Vistool 6) and the file is attached for you to look at.

Tweakie.
PEACE