Hi everybody ,
I'm new user . I bought a cnc kit with 4 axis ,connect everything ,setup mach3 like the toturial video and when i pressed RESET i got error "estop button pressed" i go to "input signals"  "enable estop" change it to red and hit apply , try again to hit RESET and he says again this error "estop button pressed" i saw that mach3 automatically changed  the enable estop to green
i don't have actually e-stop .
 
I will be very happy if somebody can help me !

Thanks

Hi, Sh.y

Set the Pin # to "0" should fix it, Don't forget the "Apply".

Chip

Thanks  Chip but
the pin # is 0 and the result is the same -    the sistem automatically
 change it the ENABLE ESTOP to green.

Hi, Sh.y

Your saying that if you click on Reset it still flashes Red, What version are you using.

E-Stop will all-ways be Green (Checked) in Ports & Pins, With 0 in pin # you should be able to Reset, Try checking the Emulated box and Port # to 0 also.

Chip

you  are right Chip ! but i have another problem :

 WHEN THE "RESET" FLASHING THE MESSAGE "ESTOP BUTTON PRESS"
APPEAR AND I HEAR THE MOTORS (TURN ON) AND WHEN I HIT "RESET" EVRYTHING
IS OK.(NO ERROR ) BUT I DON'T HEAR THE MOTORS (TURN OFF) AND THE
MOTORS NOT MOVE AT ALL (THE NUMBER ON THE SCREEN MOVE WHEN I PLAY WITH
THE ARROWS)
where i wrong ?

Hi, Sh.y

Post your Mach3Mill.xml file, It's should be located in C:\Mach3 folder, Make a copy of it and rename to ShyMach3Mill.xml.

Give us a little more info on your setup, Re-check your Ports & pin settings, Motor Outputs.

Chip

Thanks Chip for your help i'm appreciate !
i attach the file .

You have attached the wrong file, what you have there is the exe, you need to look for a file like circled in the pic.
Hood

sorry Chip
i hopes that i attach now the right file .
Thanks

oh!  Hood thaks for your attention .