Hello Guest it is May 04, 2025, 05:36:11 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: mach4 gui failure  (Read 6991 times)

0 Members and 1 Guest are viewing this topic.

Offline csherrit

*
  • 6 6
mach4 gui failure
« on: March 21, 2015, 07:48:29 AM »
Anyone see this ? win7 32 bit . new install. Gui comes up then "stops working" with this error.

  Problem Event Name:   APPCRASH
  Application Name:   wxMach.exe
  Application Version:   4.0.1.2270
  Application Timestamp:   54ffa633
  Fault Module Name:   atioglxx.dll
Logged

Offline ger21

*
  • *
  • 6,295 6,295
    • The CNC Woodworker
Re: mach4 gui failure
« Reply #1 on: March 21, 2015, 08:06:18 AM »
Quote
Fault Module Name:   atioglxx.dll

This is probably a video card driver issue.
Try updating your drivers.
Logged
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline csherrit

*
  • 6 6
Re: mach4 gui failure
« Reply #2 on: March 21, 2015, 03:35:23 PM »
I don't think that is the issue , I'm running latest driver , system is stable , video plays well . No other applications seem to have issue. 
Logged

Offline pbarratt

*
  • 125 125
Re: mach4 gui failure
« Reply #3 on: March 21, 2015, 04:03:04 PM »
csherrit,

Do a google on atioglxx.dll.  You will see that later versions of this caused problems with earlier ATI/AMD cards when running some, not all, software.  Answer appears to be to use an older version.

Hope this helps.

Peter
Logged

Offline csherrit

*
  • 6 6
Re: mach4 gui failure
« Reply #4 on: March 21, 2015, 11:09:13 PM »
Thanks Peter ,
 
you can get , get catalyst 3.4 version from here :
http://www.oldapps.com/ati.php?old_ati=22?download

extract , don't install , then copy the dll to the mach4 install directory. seems to function , we shall see.

-chaz
Logged
Pages: 1   Go Up
« previous next »