Hello Guest it is July 18, 2025, 08:03:30 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Spindle does not run when running G-code but runs when I click the toggle button  (Read 3721 times)

0 Members and 2 Guests are viewing this topic.

Offline Q Division

*
  • 1 1
Spindle does not run when running G-code but runs when I click the toggle button
« on: February 09, 2016, 10:29:12 AM »
Please help.
I've tried known good G-Code that has worked in the past.  Everything appears to work fine except that the M3 command appears to be ignored.
Any ideas?
Thanks,
Neil
Logged

Offline engraversoflight

*
  • 101 101
Re: Spindle does not run when running G-code but runs when I click the toggle button
« Reply #1 on: February 09, 2016, 12:14:46 PM »
It happens to me too.  Usually I just shut down the program, restart, and it's good.
Logged

Offline stirling

*
  • *
  • 2,188 2,188
  • UK
    • www.razordance.co.uk
Re: Spindle does not run when running G-code but runs when I click the toggle button
« Reply #2 on: February 10, 2016, 04:47:42 AM »
check your m3 macro isn't corrupt.
Logged
Pages: 1   Go Up
« previous next »