Hello Guest it is June 14, 2025, 03:28:37 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Stepper motor lubrication?  (Read 11758 times)

0 Members and 1 Guest are viewing this topic.

Offline NormB

*
  • 169 169
  • Norm
Stepper motor lubrication?
« on: January 19, 2010, 02:11:28 PM »
Do stepper motors need lubrication? 
Logged

Offline RICH

*
  • *
  • 7,427 7,427
Re: Stepper motor lubrication?
« Reply #1 on: January 19, 2010, 02:39:11 PM »
NormB,
The internal bearings have lubrication on them. They are basicaly a sealed unit and should not be taken apart.
So from what i can see i quess not. Never read anything to the contrary.
RICH

Logged

Offline NormB

*
  • 169 169
  • Norm
Re: Stepper motor lubrication?
« Reply #2 on: January 19, 2010, 02:43:17 PM »
I thought that might be the case but just had to ask.  Usually if lubrication is needed a port or some entry is provided to lubricate with.  thank you for the response.
Logged

Offline RICH

*
  • *
  • 7,427 7,427
Re: Stepper motor lubrication?
« Reply #3 on: January 19, 2010, 02:48:57 PM »
FWIW,
I took a few very old steppers apart and the bearing grease was still good. Good question though and you may want to do some internet searches and see what you find.
RICH
Logged

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
Re: Stepper motor lubrication?
« Reply #4 on: January 19, 2010, 05:02:50 PM »
Bearings on motors are what they call "sealed for life", so once you start hearing noise you know your bearings need replaced.
Hood
Logged
Pages: 1   Go Up
« previous next »