Hello Guest it is March 28, 2024, 03:06:12 PM

Author Topic: Stepper motor lubrication?  (Read 8542 times)

0 Members and 1 Guest are viewing this topic.

Offline NormB

*
  •  169 169
  • Norm
    • View Profile
Stepper motor lubrication?
« on: January 19, 2010, 02:11:28 PM »
Do stepper motors need lubrication? 

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Stepper motor lubrication?
« Reply #1 on: January 19, 2010, 02:39:11 PM »
NormB,
The internal bearings have lubrication on them. They are basicaly a sealed unit and should not be taken apart.
So from what i can see i quess not. Never read anything to the contrary.
RICH

Offline NormB

*
  •  169 169
  • Norm
    • View Profile
Re: Stepper motor lubrication?
« Reply #2 on: January 19, 2010, 02:43:17 PM »
I thought that might be the case but just had to ask.  Usually if lubrication is needed a port or some entry is provided to lubricate with.  thank you for the response.

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Stepper motor lubrication?
« Reply #3 on: January 19, 2010, 02:48:57 PM »
FWIW,
I took a few very old steppers apart and the bearing grease was still good. Good question though and you may want to do some internet searches and see what you find.
RICH

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Stepper motor lubrication?
« Reply #4 on: January 19, 2010, 05:02:50 PM »
Bearings on motors are what they call "sealed for life", so once you start hearing noise you know your bearings need replaced.
Hood