Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: NormB on January 19, 2010, 02:11:28 PM
-
Do stepper motors need lubrication?
-
NormB,
The internal bearings have lubrication on them. They are basicaly a sealed unit and should not be taken apart.
So from what i can see i quess not. Never read anything to the contrary.
RICH
-
I thought that might be the case but just had to ask. Usually if lubrication is needed a port or some entry is provided to lubricate with. thank you for the response.
-
FWIW,
I took a few very old steppers apart and the bearing grease was still good. Good question though and you may want to do some internet searches and see what you find.
RICH
-
Bearings on motors are what they call "sealed for life", so once you start hearing noise you know your bearings need replaced.
Hood