Hello Guest it is March 29, 2024, 12:35:50 AM

Author Topic: Toolpath screen issue  (Read 2725 times)

0 Members and 1 Guest are viewing this topic.

Toolpath screen issue
« on: January 19, 2010, 07:02:01 AM »
This is probably my setup but i will ask anyway.

For the last few updates of Mach while i have been moving the model in the toolpath window, i have found that it can completely shut down Mach and go to the desktop ?

Also with the latest versions of the Pokeys also, upon Mach start-up it will say no Pokeys found but the Pokeys is actually working

This is a laptop with a motion control device. ;)

I am just about to start using ver 036 Hood says it for weird computers & i think mine fits the bill. ;D

Phil
The Good Thing About Mach3, Is It's very Configurable

The Bad Thing About Mach3, Is It's Too Configurable

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Toolpath screen issue
« Reply #1 on: January 19, 2010, 04:41:30 PM »
Never seen that Phil, hope 036 cures your issues.
Hood
Re: Toolpath screen issue
« Reply #2 on: January 19, 2010, 04:56:00 PM »
Hood thanks for your concern.

I am occasionally not seeing the stock model on the screen that seems when it is more likely  to happen.

I am now running ver 036 but when i pressed "close file" it did it again.

Are you sure there is nothing in your vast knowledge that could give a clue.

Phil
The Good Thing About Mach3, Is It's very Configurable

The Bad Thing About Mach3, Is It's Too Configurable

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Toolpath screen issue
« Reply #3 on: January 19, 2010, 04:59:47 PM »
I have just spent the whole day from 8am to 9pm sorting three tax years worth of invoices and afraid my brain is a bit dead, or should I say even more dead than normal.
If I can think of anything I will shout but at this time afraid I cant. Only thing would possibly be your hardware is on its way out, maybe memory problems or graphics issues, try reseating that kind of stuff, it mght help.
Hood