Hello Guest it is March 28, 2024, 08:31:25 PM

Author Topic: Tool compensation  (Read 4166 times)

0 Members and 1 Guest are viewing this topic.

Tool compensation
« on: December 18, 2005, 06:21:47 AM »
Hi. How him imposed the compensation of the diameter of the utensil when for example with a cutter of 2.5 mms of diameter a circle of 32.5 mms of diameter is gotten instead of 30 mms of diameter? Thanks. Giordano.

Online Graham Waterworth

*
  • *
  •  2,668 2,668
  • Yorkshire Dales, England
    • View Profile
Re: Tool compensation
« Reply #1 on: December 18, 2005, 08:42:21 AM »
Hi

it sounds as if you have got G41 instead of G42 or vise versa.

Regards

Graham
Without engineers the world stops