Hello Guest it is October 16, 2019, 06:24:50 AM

Author Topic: Tool compensation  (Read 3146 times)

0 Members and 1 Guest are viewing this topic.

Tool compensation
« on: December 18, 2005, 06:21:47 AM »
Hi. How him imposed the compensation of the diameter of the utensil when for example with a cutter of 2.5 mms of diameter a circle of 32.5 mms of diameter is gotten instead of 30 mms of diameter? Thanks. Giordano.

Offline Graham Waterworth

*
  • *
  •  1,888 1,888
  • Yorkshire Dales, England
    • View Profile
Re: Tool compensation
« Reply #1 on: December 18, 2005, 08:42:21 AM »
Hi

it sounds as if you have got G41 instead of G42 or vise versa.

Regards

Graham
Without engineers the world stops