Hello Guest it is March 28, 2024, 06:20:38 PM

Author Topic: problem limit switch motion  (Read 9704 times)

0 Members and 1 Guest are viewing this topic.

problem limit switch motion
« on: October 23, 2008, 12:54:49 AM »
hi all
i am using the galil 2123 controller with mach3 software.
i have problem limit switch. when ever my limit switch interrupt my hole motion get stop even my reverse,forward motion.
example:  if my reverse limit interrupt my motion get stop then i am not able to move motor in forward/reverse direction.
again i have to manually reset my limit switch by moving motor manually.
please provide the solution.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: problem limit switch motion
« Reply #1 on: October 23, 2008, 02:58:36 AM »
Does AutoLimit Override not work for the Galil, you will find it on the setings page.
Hood
Re: problem limit switch motion
« Reply #2 on: October 23, 2008, 05:50:10 AM »
thanks hood
auto limit works for galil.
can you give the detail path where i can set auto limit override option.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: problem limit switch motion
« Reply #3 on: October 23, 2008, 05:59:55 AM »
If you look on the left hand side of the settings page you should see the option for turning them on.
Hood
Re: problem limit switch motion
« Reply #4 on: October 23, 2008, 06:41:53 AM »
i have set auto limit override button. then i try to move motor after limit interrupt using ( up/down button ) joging .
but didnot work.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: problem limit switch motion
« Reply #5 on: October 23, 2008, 06:54:07 AM »
Did you press the Reset button after you hit the limit? If you did then it looks like the Galil must do things differently.
Hood