Hello Guest it is June 25, 2026, 07:55:55 AM
Profile Guest
« previous next »
Pages: « 1 2 3 »   Go Down

Author Topic: NOISE PROBLEMS  (Read 35130 times)

0 Members and 4 Guests are viewing this topic.

Offline inivator

*
  • 102 102
Re: NOISE PROBLEMS
« Reply #10 on: July 06, 2008, 07:31:42 AM »
I hope this is right..................
inivator
Logged

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
Re: NOISE PROBLEMS
« Reply #11 on: July 06, 2008, 07:38:36 AM »
Have a look on the diagnostics page, do you see the limits lit?

Hood
Logged

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
Re: NOISE PROBLEMS
« Reply #12 on: July 06, 2008, 07:40:07 AM »
Oh another thing, you have Output 1 enabled but no pin set for it, either disable it or set the correct pin.
Hood
Logged

Offline inivator

*
  • 102 102
Re: NOISE PROBLEMS
« Reply #13 on: July 06, 2008, 07:53:57 AM »
There are no limits lit on that page.

Inivator
Logged

Offline inivator

*
  • 102 102
Re: NOISE PROBLEMS
« Reply #14 on: July 06, 2008, 08:04:18 AM »
no limits lit on that page :-\ :-\
Logged

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
Re: NOISE PROBLEMS
« Reply #15 on: July 06, 2008, 08:10:24 AM »
when you press a limit do they light? If not then disconnect your parallel port cable and touch pin 12 to ground on the port itself with a piece of wire. your limits should light on the diagnostice page.
Hood
Logged

Offline inivator

*
  • 102 102
Re: NOISE PROBLEMS
« Reply #16 on: July 06, 2008, 08:19:56 AM »
Is that done with the paralell port cable still un-attached?
Logged

Offline Chaoticone

*
  • *
  • 5,624 5,624
  • Precision Chaos
Re: NOISE PROBLEMS
« Reply #17 on: July 06, 2008, 08:27:51 AM »
Quote
Is that done with the paralell port cable still un-attached?

Yes, the pin on the parallel port on the back of the PC. Disconnect the cable so you can get to the pin and ground it as you watch the diag. page. Should see the input go active.

Brett
Logged
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!

Offline inivator

*
  • 102 102
Re: NOISE PROBLEMS
« Reply #18 on: July 06, 2008, 08:33:42 AM »
Disconnect the p.p. cable from the computer, and ground the pin 12 to ground in the db-25 connector.  Is that right.
Logged

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
Re: NOISE PROBLEMS
« Reply #19 on: July 06, 2008, 08:35:54 AM »
Pin 12 on the computers parallel port to the metal housing on that port.
Hood
Logged
Pages: « 1 2 3 »   Go Up
« previous next »