Hello Guest it is March 29, 2024, 04:55:27 AM

Author Topic: Limit Switch Problems  (Read 13486 times)

0 Members and 1 Guest are viewing this topic.

Re: Limit Switch Problems
« Reply #10 on: June 29, 2008, 10:51:37 AM »
Thanks for the help Hood, I try everything you have told me, and will let you know the outcome.

Again, thanks...........

Inivator

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Limit Switch Problems
« Reply #11 on: June 29, 2008, 10:55:04 AM »
no problem, you will get there in the end :)

Hood
Re: Limit Switch Problems
« Reply #12 on: June 29, 2008, 01:45:39 PM »
COULD YOU PLEASE SEND ME A SCREEN SHOT OF THE HOMING AND LIMITS.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Limit Switch Problems
« Reply #13 on: June 29, 2008, 01:54:53 PM »
Here you go.
Hood
« Last Edit: June 29, 2008, 01:57:55 PM by Hood »
Re: Limit Switch Problems
« Reply #14 on: June 29, 2008, 02:01:24 PM »
I'M SORRY HOOD, I ON A DIFFERENT COMPUTER.....THIS IS INIVATOR

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Limit Switch Problems
« Reply #15 on: June 29, 2008, 02:03:54 PM »
Yes, your name gave that one away ;)

Hood
Re: Limit Switch Problems
« Reply #16 on: June 30, 2008, 10:44:18 AM »
Hood sent a screen shot of the setting I need, but I did not understand his direction.  My machine is x=40, y=16.5, and z =4.  x0 and y0 are in the left hand corner. Can someone send me a screen shot with the correct setting.  Z down is -.

Thanks

Inivator

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Limit Switch Problems
« Reply #17 on: June 30, 2008, 11:00:56 AM »
Xmin is 0, Y min is 0,  Zmin is -4
X Max is 40,  Y Max is 16.5,  Z Max is 0

Hood
Re: Limit Switch Problems
« Reply #18 on: June 30, 2008, 11:33:44 AM »
Thanks  you sir....................

Inivator
Re: Limit Switch Problems
« Reply #19 on: June 30, 2008, 11:38:39 AM »
From the MDI screen, will G28 send the axis to home.