Hello Guest it is December 02, 2021, 05:06:14 PM

Author Topic: Step per unit  (Read 2745 times)

0 Members and 1 Guest are viewing this topic.

Step per unit
« on: May 08, 2006, 07:46:11 AM »
Hi to all. I have read in a forum that the number in the playpen Step for unit it is critical. When Mach3  is installed this number is planned to 2000. I have a microstep controller RTA planned to 800 passi/giros and a screw with pitch 4mm. I have planned the number step for unit to 200. Is it correct? Thanks in advance. Giordano.
Re: Step per unit
« Reply #1 on: May 08, 2006, 11:05:15 AM »
Sounds right to me :)
Fixing problems one post at a time ;)